Authentic Indonesian StonesWorldwide Shipping
RENDI VIRGO
A lapidary craftsman polishing a green agate cabochon on a water-fed grinding wheel
← Lapidary

FROM FIRST LOOK TO FINAL FORM

A careful path through every cut.

Fifteen considered steps guide each commission, from the first material review to the final inspection and handover.

15STEPS · 3 PHASES
01

PHASE 01

Understand the material

We establish what the stone can safely become before work is approved.

01 — 05
  1. 01
    Receive the briefRead detailsClose details

    We record your goals, intended use, preferred shape, finish, and timing.

  2. 02
    Confirm material sourceRead detailsClose details

    We confirm whether the stone comes from your collection or from RENDI VIRGO stock.

  3. 03
    Document arrivalRead detailsClose details

    Customer supplied material is photographed and its received condition is recorded.

  4. 04
    Inspect the stoneRead detailsClose details

    We examine visible inclusions, fractures, surface condition, and dimensions.

  5. 05
    Assess feasibilityRead detailsClose details

    The studio considers the requested cut, material behavior, likely yield, and risks.

02

PHASE 02

Plan and shape

Once the scope is approved, the cutter prepares and works to the agreed plan.

06 — 10
  1. 06
    Define the scopeRead detailsClose details

    We agree on dimensions, quantity, tolerances, finish, and any practical limitations.

  2. 07
    Prepare the written quoteRead detailsClose details

    The quote sets out the price and estimated studio time before any cutting begins.

  3. 08
    Receive approvalRead detailsClose details

    Work begins only after you approve the scope, price, and material arrangements.

  4. 09
    Mark the orientationRead detailsClose details

    The cutter maps the intended face and direction around the stone's natural features.

  5. 10
    Prepare the materialRead detailsClose details

    The stone is cleaned, secured, and prepared for the chosen cutting method.

03

PHASE 03

Finish and hand over

Each piece is refined, checked against the brief, then prepared for collection or return.

11 — 15
  1. 11
    Rough shapeRead detailsClose details

    The cutter removes material gradually to establish the approved outline.

  2. 12
    Refine the geometryRead detailsClose details

    Angles, curves, symmetry, and dimensions are brought closer to the agreed design.

  3. 13
    Progress through abrasivesRead detailsClose details

    The surface is refined through suitable abrasive grades to remove marks from shaping.

  4. 14
    Polish and cleanRead detailsClose details

    The agreed finish is applied, then the piece is cleaned for careful inspection.

  5. 15
    Inspect and hand overRead detailsClose details

    We review the result, document completion, and arrange collection or return shipping.